Showing posts with label porsche. Show all posts
Showing posts with label porsche. Show all posts
Thursday, May 23, 2013
Porsche 911 GT1

The Porsche 911 GT1 was a car designed for competition in the GT1 class of sportscar racing, which also required a street legal version for homologation purposes. The limited-production street-legal version was labeled the 911 GT1 Straßenversion (Street version).

It competed with the Ferrari F50, Mercedes CLK GTR and the McLaren F1 GTR.
History
911 GT1

With the revival of international sportscar racing in the mid-1990s, though the BPR Global GT Series (which then morphed in to the FIA GT Championship) Porsche expressed interest in returning to top level sportscar racing and went about developing its competitor for the GT1 category. Cars in this category were previously heavily modified versions of road cars, usually supercars such as the McLaren F1 and Ferrari F40, but when the 911 GT1 was uneveiled in 1996 Porsche had exploited the rule book to the full and stunned the sportscar fraternity. Rather than develop a race version of one of their road going models, what they created was effectively a purpose built sports-prototype, but in order to comply with regulations a street legal version was created, 911 GT1 Straßenversion - literally a road-going racing car.

911 GT1
In spite of its 911 moniker the car actually had very little in common with the 911 of the time, however its frontal chassis was shared with the then (993) 911, while the rear of the car was derived from the Porsche 962, including its water-cooled, twin-turbocharged and intercooled, four valve per cylinder flat-six engine which was arranged in amid-mounted position, compared to the rear-engined layout of a conventional 911. The engine was making about 600 PS (441 kW; 592 hp). In comparison, the 993 generation 911 GT2, which was otherwise the companys highest-performance vehicle, used an air-cooled engine with only two valves per cylinder.
The 1996 version of the 911 GT1
The new vehicle was an outright success at Le Mans, winning the GT1 class at its debut race, although it lost the overall victory to Joest Racings Porsche WSC-95 prototype, still a success in that this vehicle used a Porsche powerplant.

The 911 GT1 made its debut in the BPR Global GT Series (the FIA championships predecessor) at the Brands Hatch 4 hours, where Hans-Joachim Stuck and Thierry Boutsen won comfortably, although they were racing as an invited entry and were thus ineligible for points. They followed up by winning at Spa and Ralph Kelleners and Emmanuel Collard triumphed for the factory team at Zhuhai.

The 96 GT1 had around 600 PS (441 kW) and was clocked at a top speed of exactly 330 km/h (205 mph) on the legendary Mulsanne Straight in the practice sessions of the 1996 Le Mans 24 Hours Race (presumably on a low downforce setup).
911 GT1 Evo
A 911 GT1 Evo competing during the 1997 FIA GT Championship season
In 1997, the new Mercedes-Benz CLK-GTR was successful in the new FIA GT Championship that replaced the BPR, as it was developed for racing. Mercedes did not enter Le Mans yet with their new car, though. The Porsche did not prove to be as fast in the FIA series, and failed to win a single race, first against the McLaren F1 GTR, and then against the new CLK-GTR.

Towards the end of the 1996 season Porsche made revisions to the 911 GT1 in preparation for the 1997 season. The front end of the car was revised including new bodywork which featured headlamps that previewed the all-new 2nd generation (996) Porsche 911 which would appear in 1997. The revised car was known as the 911 GT1 Evo (or Evolution). As far as performance goes, the car had the same 600 PS (441 kW; 592 hp) turbo-charged engine, but new aerodynamics on the car allowed the 97 car to be considerably faster than the 1996 model - acceleration was better, although the top speed was still around 330 km/h (205 mph) on the La Sarthe Circuit (in the race, the GT1-Evo reached 326 km/h). However, the works cars suffered from reliability problems and did not last the full race distance; a privately entered 1996 specification GT1 managed 5th overall and third in its class, but was beaten by the BMW-backed and powered McLaren F1 GTRs.

911 GT1-98
For the 1998 season Porsche developed an all-new car, the 911 GT1-98. Designed to match the also new Toyota GT-One and Mercedes-Benz CLK-GTR, the 911 GT1-98 featured bodywork which bore more of a resemblance to traditional sports-prototypes than the previous 2 models while a new sequential gearbox was installed. As per the regulations a street-legal version of the 911 GT1-98 was spawned, but it is believed that only one variant was produced which was still sufficient to satisfy the regulations.

During the 1998 FIA International GT season the 911 GT1-98 struggled to match the pace of the Mercedes, which also were improved, with the main reason being down to the air-restrictor rules being which were regarded as unfavourable to the turbo engine (the Merecedes being naturally aspirated). The Michelin tyres of the factory team and especially the Pirelli of the private Zakspeed team were also considered inferior to the Bridgestone of Mercedes.
The front end of a 911 GT1 98, showing the headlights inspired by the 996-generation 911.
At the 1998 Le Mans however, it was a different story. The BMW V12 LM retired with wheel bearing trouble, and the Mercedes CLK-LM vehicles had oil pump troubles in the new V8 engines that replaced the former V12. The Toyota GT-One, which was considered to be the fastest car, also suffered gearbox reliability problems.
The 911 GT1-98, despite being slower than the Toyota or the Mercedes, fulfilled Porsches slim hopes, taking both first and second place overall thanks to reliability, giving Porsche its record-breaking 16th overall win at Le Mans, more than any other manufacturer in history.
At Petit Le Mans race in Road Atlanta, the 911 GT1 98 of Yannick Dalmas made a spectacular backward flip and landed rear first before hitting the side barriers, as did the BMW V12 LMR at the same race in 2000, and most infamously the Mercedes-Benz CLR at Le Mans in 1999.
The GT1 98 was set up with higher downforce in the race than the previous two years, which reduced its race maximum speed to 310 km/h (193 mph). However, in the 1998 Le Mans 24 Hours test days, the car hit 330 km/h (205 mph) on the Mulsanne Straight on a lower downforce setup.

1999
With Mercedes dominating FIA GT1 in 1998, all other entries including Porsche withdrew for 1999. The GT1 class was cancelled, and the FIA GT Championship was contested with GT2 cars. Porsche could have entered at Le Mans, but chose not to try to defend the win of 98 against new machines from other factories.
Champion Racing brought a 911 GT1 Evo to America to race in the American Le Mans Series, but was only allowed to do so as an LMP (Le Mans Prototypes) class entry, where it proved uncompetitive against actual prototypes such as the BMW V12 LMR.
Gunnar G-99
Following Champions purchase of a 911 GT1 Evo for 1999, Gunnar Racing offered a custom race car to the team with intentions to race in 2000. The car, known as the Gunnar G-99, was a custom-built 911 GT1 with an open cockpit. The chassis was made from scratch yet remained nearly identical to the 911 GT1 mechanically, even using the bulk of the bodyparts. A large rollbar was put over the open cockpit to help protect the driver. A 3.6 litre flat-6 from a Porsche 911 GT3 was used in place of the standard 911 GT1 unit.

However, Champion would instead turn to buying a Lola B2K/10, so the Gunnar G-99 was temporarily abandoned. The car would resurface in the Rolex Sports Car Series in 2002, yet would not be allowed to race until it had a roof again. Therefore Gunnar Racing rebuilt the car with a near identical GT1 roof, and briefly competed in 2003. The car would take a best finish of second in class twice before being retired due to lack of funding.

Street-legal version
| Manufacturer | Porsche |
|---|---|
| Predecessor | Porsche 959 |
| Successor | Porsche Carrera GT |
| Class | Sports Car |
| Layout | Rear mid-engine, rear-wheel drive |
| Engine | 3.2 L Flat-6 twin-turbo |
| Transmission | 6-Speed manual |
| Length | 4,890 mm (192.5 in) |
| Width | 1,990 mm (78.3 in) |
| Height | 1,140 mm (44.9 in) |
| Curb weight | 1,150 kg (2,535 lb) (dry) |
Regulations for the GT1 category stipulated that to be eligible, a total of 25 cars must be built for road use. Porsche developed a fully road-legal version, dubbed "911 GT1 Straßenversion", and delivered one in early 1996 to the German government for compliance testing, which it passed. The engine had to be slightly de-tuned to meet European emissions laws, although its 544 PS (400 kW; 537 hp) and dry weight of 1,150 kg (2,535 lb) proved to be more than adequate; the vehicle could accelerate to 100 km/h (62 mph) from a standstill in 3.9 seconds on its way to a top speed of 308 km/h (191 mph).
Wednesday, May 22, 2013
Porsche 959

The Porsche 959 was a sports car manufactured by Porsche from 1986 to 1989, first as a Group B rally car and later as a legal production car designed to satisfy FIA homologation regulations requiring that a minimum number of 200 street legal units be built. It is a very expensive auction today. Its main rival was the iconic Ferrari F40.

In 1986, it held the title as the worlds fastest street-legal production car, boasting a top speed of 195 mph, with the sport model capable of reaching 197 mph. This was until the Ferrari F40s introduction in 1987; which was capable of reaching a top speed of 201 mph. During its production run, it was hailed as the most technologically advanced road-going sports car ever built and the forerunner of all future super cars. It was one of the first high-performance vehicles to use an all-wheel drive system, providing the basis for Porsches first all-wheel drive Carrera 4 model. In fact, it convinced Porsche executives of the systems viability so well that they chose to make all-wheel drive standard on all versions of the 911 Turbo starting with the 993 variant. In 2004, Sports Car International named the 959 number one on its list of Top Sports Cars of the 1980s.

Porsche today makes the iconic 911, the Boxter, the Cayman, the Cayenne SUV, the Panamera saloon and the 918 hypercar.

History
Development of the 959 (originally called the Gruppe B) started in 1981, shortly after the companys then-new Managing Director, Peter Schutz, took his office. Porsches head engineer at the time, Helmuth Bott, approached Schutz with some ideas about the Porsche 911, or more aptly, a new one. Bott knew that the company needed a sports car that they could continue to rely on for years to come and that could be developed as time went on. Curious as to how much they could do with the rear-engined 911, Bott convinced Schutz that development tests should take place, and even proposed researching a new all wheel drive system. Schutz agreed, and gave the project the green light. Bott also knew through experience that a racing program usually helped to accelerate the development of new models. Seeing Group B rally racing as the perfect arena to test the new mule and its all wheel drive system, Bott again went to Schutz and got the go ahead to develop a car, based on his development mule, for competition in Group B.


Porsche 959 at the Boston Museum of Fine Arts in 2005
Porsche developed an already existing engine instead of creating a new one from scratch. The powerplant, a twin-turbocharged six-cylinder boxer engine with an air-cooled block and water-cooled heads, displaced 2.85 liters, about half a liter less than a contemporary 911 engine. It was coupled to a unique manual gearbox offering 5 forward speeds plus a "G" off-road gear, as well as reverse. The motor had originally been developed for the "Moby Dick" race car and then been redeveloped slightly for the short-lived Porsche Indy Car and several other projects before being "tweaked" a last time for use in the 961, the 959s racing counterpart. The water-cooled cylinder heads combined with the air-cooled block, 4-valve heads and sequential turbochargers allowed Porsche to extract 331 kW (444 hp) from the compact, efficient and rugged power unit. The use of sequential twin turbochargers rather than the more usual identical turbochargers for each of the two cylinder banks allowed for smooth seamless delivery of power across the engine RPM band, in contrast to the abrupt on-off power characteristic that distinguished Porsches other turbocharged engines of the period. The engine was used, virtually unchanged, in the 959 road car as well.


In an attempt to create a rugged, lightweight shell, Porsche adopted an aluminium and Aramid (Kevlar) composite for body use along with a Nomex floor, instead of the steel normally used on their production cars. The vehicles weight of 3,190 pounds (1,450 kg) helped to achieve its high performance level.

2.85-l-Biturbo-Engine
Porsche also developed the cars aerodynamics, which were designed to increase stability, as was the automatic ride-height adjustment that became available on the street car (961 race cars had fixed suspensions). Its "zero lift" aerodynamics were a big part of keeping it drivable. The 959 also featured Porsche-Steuer Kupplung(PSK) which was at the time the most advanced all-wheel-drive system in a production car. Capable of dynamically changing the torque distribution between the rear and front wheels in both normal and slip conditions, the PSK system gave the 959 the adaptability it needed both as a race car and as a "super" street car. Under hard acceleration, PSK could send as much as 80% of available power to the rear wheels, helping make the most of the rear-traction bias that occurs at such times. It could also vary the power bias depending on road surface and grip changes, helping maintain traction at all times. The dashboard featured gauges displaying the amount of rear differential slip as well as transmitted power to the front axle. The magnesium alloy wheels were unique, being hollow inside to form a sealed chamber contiguous with the tire and equipped with a built-in tire pressure monitoring system.
Porsche 959
All Porsche 959s were actually produced at Baur, not at Porsche, on an assembly line with Porsche inspectors overseeing the finished bodies. Most of Porsches special order interior leather work was also done by the workers at Baur.
The 1983 Frankfurt Motor Show was chosen for the unveiling of the Porsche Group B prototype. Even in the closing hours of October 9, finishing touches were being applied to the car to go on display the next morning. After the first two prototypes, the bodywork was modified to include air vents in the front and rear wheel housings, as well as intake holes behind the doors. The first prototype modified like this was code named "F3", and was destroyed in the first crash test.

The street version of the 959 debuted at the 1985 Frankfurt Motor Show as a 1986 model, but numerous issues delayed production by more than a year. The car was manufactured in two levels of trim, "Sport" and "Komfort", corresponding to the race version and the street version. First customer deliveries of the 959 street variant began in 1987, and the car debuted at a cost of $225,000 USD per unit, still less than half what it cost Porsche to build each one. Production ended in 1988. In total, 337 cars were built, including 37 prototypes and preproduction models. At least one 959 and one 961 remain in the Porsche historic hall in Stuttgart, Germany.

In 1992/1993, Porsche built eight 959s assembled from spare parts from the inventory at the manufacturing site in Zuffenhausen. All eight were "Komfort"-versions: four in red and four in silver. These cars were much more expensive (DM 747,500) than the earlier ones (DM 420,000). The later cars also featured a newly developed speed-sensitive damper system. The cars were sold to selected collectors after being driven by works personnel for some time and are today by far the most sought-after 959s.
.jpg)
The 959 was not street legal in the United States prior to 1999 when the "Show and Display" law was passed, although an unknown number were imported via the "grey market" during the late 1980s as show pieces. During the models development Porsche refused to provide the United States Department of Transportation with the four 959s they required for crash testing, and the car was never certified by the National Highway Traffic Safety Administration for street use in the U.S. With the passage of "Show and Display" the crash test requirements were removed and importation of the 959 was allowed, assuming the car could meet the emissions standards applicable in 1987. The 959 can be fitted with a catalytic converter and a rechipped computer which allows it to meet those emissions requirements. As they are pre 1996 they would not be required to pass any emissions testing anymore.
.jpg)
Most owners refuse to modify their 959s, however, and the cars remain collection pieces. Most 959s are in the hands of collectors, but a few do occasionally come to market, with prices in the region of 180,000–250,000 EUR (cars produced in 1987/1988). It is impossible to estimate the price of cars from the highly limited batch of 1992/1993.
The lessons learned from the 959 project about engine management, aerodynamics, suspension tuning, and 4-wheel drive were what enabled the production life of the 911 to be extended to the present day.
Performance
The performance of the 959 Sport is as follows:
- 0–100 km/h: 3.7 s (62 mph)
- 0–160 km/h: 8.3 s (99.5 mph)
- 0–200 km/h: 13.0 s (124 mph)
- 0–1000 meters: 21.6 s (standing)
- 0-1/4 mile: 11.9 s (standing)
Racing

When Porsche began development of the 959, it looked toward Group B racing as a road-racing laboratory with which to develop technology for production cars. When Group B became focused on rallying events, however, Porsche felt the relevance to production cars was greatly reduced, and the goal of the 959 project shifted to frank state-of-the-art, cost-no-object technological innovation.
Porsche 959 Rally variant
In 1984, however, three 911s modified to 959 specifications (due to the requirement that Group B cars be based on production cars with at least 200 built) were used in the Paris-Dakar Rally, with Jacky Ickx the prime motivator. By 1985 the 959 rally variant was ready, but it experienced a disappointing start: all three cars failed to finish. However, in 1986 the 959 finished 1-2. The 959 was never seriously considered for a Group B Rally season; the cost of completing a full season far outweighed any technical information that would have been gained. The car was produced as a 1/12th scale radio control model from [Tamiya] which is now widely collected by fans (see collectors models)
.jpg)
1986 was also the year that the racing variant, the Porsche 961, made its debut at the 24 Hours of Le Mans. Driven by René Metge partnering Claude Ballot-Léna, it finished first in its class and 7th overall. It returned in 1987 but failed to finish after a spin (missed gear change) while in 11th place by Canadian/Dutch driver Kees Nierop of Vancouver. Upon rejoining the track the car was observed on TV monitors in the Porsche pits to be on fire and the driver was told to stop and get out of the car. Sadly Nierop pulled over between marshal stations and this extra time taken to get to the car by the marshals allowed the fire to consume most of the rearend and writing the car off for further racing. Thus ended the career of the 961.
Canepa Design modifications
In 2003, Canepa Design initiated a 959 program. By making their own modifications to the 959s turbo, exhaust and computer-control systems, Canepa could enable the 959 to pass emissions requirements (thereby making it street-legal in the United States) and extract more power from the 959s engine. Total power output from the Canepa-modified 959 is 640 hp (477 kW) and 570 lb·ft (773 N·m) of torque, making the car capable of 3 second 0-60 times and top speeds in excess of 220 miles per hour (350 km/h). Canepa also modifies the 959s lightweight magnesium wheels to allow the fitting of tires without the unique Dunlop Denloc bead, and fits a modern Michelin high-performance tire capable of handling the increased performance.

"Gates 959"
The "Gates 959" is an infamous car, one of the Porsche 959s built in the mid-eighties, imported by Bill Gates to the United States in 1987. Gates fellow Microsoft co-founder Paul Allen imported another one, as did Porsche collector Jerry Seinfeld. These cars had not been approved by regulators and had no Department of Transportation and Environmental Protection Agency approval. The "Gates 959" was stored for 13 years by the Customs Service at the Port of Seattle, until regulations were changed to allow "Autos of Interest" to be imported with severe limitations on their use. Gates and Allen both helped pass the "Show and Display" law.
Replicas and conversion kits
Due to the scarcity and price of existing genuine 959s, several companies have offered body kits over the years for Porsche owners to apply to their own cars, mainly the 911 model.


Tuesday, May 21, 2013
Porsche Panamera Platinum Edition Image Gallery

Porsche sets with the Platinum Edition on an especially exclusive version of the Panamera

The outside of the Edition model to identify, among other things shiny black side window moldings and 19-inch wheels

Five finishes are available for the precious Panamera options - including Mahogany Metallic

The lower bowl of the mirrors and the fins of the air inlet grilles are made of metallic silver

The interior is designed in an exclusive two-tone version in black and beige

Driver and front passenger are greeted by individual door sills

The entry-level version of the Porsche Panamera is powered by a 300 hp six-cylinder

Under the hood of the Porsche Panamera GTS a 4.8-liter V8 with 430 hp works

The Porsche Panamera Turbo is 500 hp at the start

The top model is the Panamera Turbo S. This makes the proud V8 550 hp

Panamera is the most energy-efficient 250 hp diesel engine, which will be satisfied with 6.5 liters

In addition, there is the Panamera S Hybrid, which is to consume at a system output of 380 hp on average 7.1 liters
Subscribe to:
Posts (Atom)