Showing posts with label 3. Show all posts
Showing posts with label 3. Show all posts

Saturday, June 1, 2013

BMW 3 Series Coupe – BMW 335i

After the launch of the new E90 BMW 3-series (and E91 BMW 3-series station wagon) which has been on Malaysian roads for quite some time now, BMW has finally revealed the 2-door version of the E90 sedan, the E92 BMW 3-Series Coupe. Along with the new bodyshape, BMW also launches it’s first twin-turbo petrol engine in a production car for the BMW 335i SE Coupe.
The new E92 3-series coupe has a very elegant shape. The coupe roofline has a very elegant curve to it, which makes the car look longer than how it’s predecessor, the E46 Coupe looked. It’s also longer than the E90 BMW 3-series sedan, which is 4520mm long. The new BMW 3-series Coupe is 4600mm long, which is about 80mm longer. The body has a near-perfect 50:50 weight distribution and the engine drives the rear wheels, except for the 328xi which is equipped with an all-wheel drive system called BMW xDrive. The new 3-series coupe body also uses plastics in certain areas like the front wing, which makes the new 3-series coupe on average 10kg lighter than equivalent sedan models.
BMW also introduces a new 335i model with the new E92 3-series coupe. The 335i is powered by a 3.0 liter in-line 6 cylinder twin-turbocharged engine. The engine is also equipped with BMW’s direct injection system using electric piezo injectors. This new 335i engine makes 306hp and torque figures are a massive 400Nm of torque available from as low as 1300rpm all the way up to 5000rpm, from where the maximum torque dips until it reaches it’s redline of 7000rpm. The engine’s torque curve sounds REALLY sweet. Would love to drive one. I previously mentioned the engine will have it’s two turbos in sequential form, so I apologize for the mis-information. The twin-turbo system is actually in-line, with a turbo being fed by 3 cylinders each. Two smaller turbos alllow a much faster spooling time than 1 big turbo. The usage of forced induction allows this new 335i engine to make as much power as a normally aspirated V8 engine of a higher displacement, but weighs 70kg lighter. The engine was designed to compete against competition like the Lexus IS350 and Infiniti’s 3.5 liter offerings, as well as be a bridge between the current 3.0 liter normally aspirated engine and the 4.0 liter V8 engine to be offered with the BMW M3. This engine gives the BMW 335i Coupe a 0-100km/h speed of 5.3 seconds and an electronically limited top speed of 240km/h.
Above: Top – The new 3.0 liter twin-turbocharged 335i engine. Below – The 335i’s turbo manifold. Three cylinders feed each turbo with exhaust gas, spooling them up to create boost.
The new BMW 3-series Coupe will be introduced with 328i, 328xi, and the 335i in the US market, while the UK market will get the 325i and the 335i. Entry-level 320i Coupe and 320d turbodiesel Coupe as well as 330i and 330d turbodiesel models will be introduced later, so for now the entry-level 3-series Coupe will be the 325i. The US market BMW 3-series coupe will come with either a 6-speed close ratio manual gearbox or an automatic gearbox. The automatic gearbox option will come with paddle-shifters behind the steering wheel whenever the driver wants to have more involvement in the transmission’s selection of gear ratios.
Read more »

Thursday, May 23, 2013

2013 NEW BMW 3 Series Li

2013 NEW BMW 3 Series Li
Creating its introduction at the China Engine Display next weeks time will be a expanded edition of the new BMW 3 Series Li. Built particularly for the China industry, the BMW 3 Series Li is 11cm more time than the conventional car and will be created at BMWs new flower in Shenyang. It will be provided with a option of three fuel applications. This has a 2.0-liter four-cylinder website with 181bhp and 270Nm of twisting, and a twin-turbocharged edition of the same website generating 241bhp and 350Nm. 
Top-of-the-range 335Li gets a 3.0-liter twin-turbo straight-six, which generates 302bhp and 406Nm of twisting. This edition will be able to go from 0-62mph in less than six a few moments. The BMW 6 Sequence Nan Vehicle, M6 Vehicle, X3 xDrive28i and X6 will also make their Oriental introduction next weeks time, and will be a part of the conventional 3 Sequence and i3 Idea on BMWs take a position.
Read more »

Tuesday, May 21, 2013

MV Agusta Brutale 1090 2013 Release 3 New Models



MV Agusta Italian motorcycle manufacturer released three models Brutale 1090 2013. Besides Brutale 1090, two other models are 1090R and 1090RR which are all four-cylinder engine with a capacity engine of 1078 cc, as used on the 2012 model.

The three big bike is already equipped with traction control with 8 levels of adjustment, plus frame trellis the aluminum plate on the bottom of the tank, plus a single swing arm, models fork inverted 50 mm, ten bolt rims and the top calipers Brembo are radial. 


As the driving force, the three models equipped of cardiac pacemaker 4-cylinder DOHC, and four valves per cylinder in radial arrangement. Although the same capacity is 1078 cc, but MV Agusta differentiating power aspect, is 142PS with torque112Nm for the first two models and another 156PS that torque 100.1 Nm for variant 1090RR. Power is channeled to the rear wheels with 6 speed transmission, except RR fitted clutch slipper.


Agusta Brutale 1090 there was a choice of three colors, the matte-black, matte pearl white or matte metallic bray, with a tag of  U.S. $ 16.962 currently 1090R ranges from $ U.S 18.268  and $ U.S 22.18.

Read more »

Mazda 3 Self Development I Stop

i-stop is the new, self-developed start-stop system of Mazda, which uses combustion energy to start. It is expected to reduce fuel consumption by 14 percent.

With its corporate strategy of "Sustainable Zoom-Zoom" Mazda promises its customers vehicles with outstanding environmental and safety technologies. The new start-stop system "i-stop", which will be available in August, should make an important contribution. It automatically switches off the engine when the vehicle comes to a stop. If the driver wishes to back, the engine restarts without delay. The highlight: i-stop advantage for the fast and fuel efficient restart the combustion energy of the motor. An electric starter motor support to boot.

Available with the equipment lines High-Line and Sport Line
The developed system makes its debut in the new Mazda3 2.0-liter four-cylinder DISI (Direct Injection Spark Ignition = DISI). The 111 kW/151 hp petrol engine provides a top speed of 206 km / h in 5-door hatchback, or 212 km / h, in the 4-door notchback sedan, the sprint from 0-100 km / h takes in 10 4 seconds.

The new Mazda3 consumed with the i-stop technology consumes just 6.8 liters of fuel per 100 kilometers. Thats according to the manufacturer 14 percent less than the 2.0-liter petrol engine with port injection from the Mazda3 the first model generation. The fuel consumption of the Euro 5 engine classified corresponds to CO2 emissions of 159 g / km.

Available is the new Mazda3 with i-stop technology in combination with the two higher trim levels High-Line and Sports-Line with a manual 6-speed transmission from 22,600 euros.
Read more »

Saturday, May 18, 2013

Kawasaki Launched Ninja 300 at Rs 3 5 Lakhs

Bajaj finally took the covers of the much anticipated Kawasaki Ninja 300. All new Ninja 300 is priced at RS 3.5 Lakhs ( Ex-showroom Delhi) and the on road price will go above RS 4 lakhs. Kawasaki Ninja 300 replaces the Ninja 250 R in India. Kawasaki Ninja 250 R is priced at RS 2.70 lakhs (Ex-showroom Delhi). Compared to the Ninja 250 R price tag of Ninja 300 is little expensive. Like the Ninja 250 R Kawasaki is not offering the ABS version of Ninja 300 in India.

Kawasaki Ninja 300 Launched

Kawasaki Ninja 300 is powered by Liquid cooled 4 stroke parallel Twin which makes 38.45 BHP @ 11,000 RPM and torque of 27 NM @ 10,000 RPM. This engine is mated to a 6 speed transmission with Slipper clutch which reduces the rear wheels from lock up on fast downshifting. Performance numbers for Ninja 300 is much better than the Ninja 250 R. 0-100 comes in less than 7 seconds and Top speed close to 180 Kmph. Kawasaki used 37mm telescopic front suspension and 5 speed uni-trak rear suspension for the Ninja 300.

Kawasaki Ninja 300 get 17 inch alloy wheels with 110mm front and 140 mm rear tyres. Wheel base for the Ninja 300 is 1405mm and the ground clearance is 140mm. Kawasaki has given 17 L Fuel tank and the ninja 300 tips the scale at 172 Kgm. Ninja 300 is available in two colors green or white. Kawasaki Ninja 300 will be sold through Bajaj pro biking showrooms and will be available from tomorrow onwards. Watch out for the Exclusive First Drive Report of Ninja 300 in Autogadget.

Kawasaki Ninja 300 Launched 2

PIC CREDIT : Kawasaki Ninja 300 - India Facebook Page

Read more »